Clip-On Shipping Container Wheels, 7000# Spindle Kit (1 Set) over 100 sets sold

Description

We have sold well over a 100 sets now. We now have some EBAY imitators, they are even using our photos. Look closely at the heavier steel plate (1 inch thick) on these vs the imitators 1/2inch. The much larger diameter "no joke lug" we use (ours is cut from a solid piece of steel ..... the lug is one of the most critical parts for safety and the thicker steel plate further prevents the lug from pulling through) .. the knock-offs even have the jack-bolts in the wrong location .... these push the top of the plate tight into the container for anti-rotation (another tested safety feature).
EBAY removed our imitator for intellectual property infringement (Copyright, Trademark, and Patent). And provided their information for further legal action. If you purchased one of their items with the 1inch lugs ....please be careful. For comparison a 1/2 ton pickup axle is 1.5inches in diameter, spec'd to support a few thousand pounds ... a 1inch diameter lug will not support the weights many shipping containers unloaded or loaded can bring. Our lugs are cut from 3inch round-stock steel and the post into the container corner is ~1.95inches which fills the 2inch opening (for safety......see the pictures that compare the difference between a 1.048" lug and a 1.95" lug).
This listing is for a set of two (2) clip-on dolly spindles with 6lug x 5.5inch bolt pattern (standard trailer type)
and 7000lb bearings
(rims, tires not included).  (a standard EMPTY 40 foot shipping container weighs about 6000Lbs, so the clip-on wheels on an end will be supporting about 3000Lbs).
The 1" steel in these units make them twice as heavy as the 1/2" plate imitators.
These are for non-public road use ONLY. Moving containers around a parking lot for example. Operate at less than 1 MPH please.
I have delivered several of these units personally, always with great pride. Customers pick-up at our location and we've NEVER had a bad comment. We practice "Continuous Improvement" and are refining our production process daily. These units are "Farm Implement" class devices with the focus on safely / reliably moving shipping containers. Our customers include the U.S. Navy, large construction companies, and many International Relief Agencies (perfect for disaster sites).
Bill Robinson
We also have:
1. Shipping container hydraulic jack lift / leveling system available: https://www.ebay.com/itm/153861389776
2. S
hipping container chain-connect lifting system
.
3. 8000# Clip-On Wheel Kit available
4. Heavy Duty Machinery Skates / Bolt-On Equipment Rollers
A shipping container hitch system and solar panel charged lighting system is in the works. Send a message if interested.
***Please note:  ships in 2 boxes.